Steps to Create a Unicorn Horn Flower Crown

Due to the fact that who should have to choose between a flower crown and a unicorn horn? Kaia actually wanted to use both for her Birthday, and this is what I wound up with.

I didn't want a modeling clay horn held on with an "unnoticeable" flexible band. I desired a horn that would go on easily and conveniently, one that was light-weight, was not vulnerable, and would stay in place well on her head while she cantered around the house extremely, rearing and leaping. Because you know that is what is going to happen when you put a unicorn horn on a 4 year old.

When I made the horn, I was believing I would experiment a bit, start figuring things out. Not the prettiest pictures, but ideally they at least make the procedure simple to see.

You will require:.

Craft Felt in Various Colours.
Stuffing.
Sewing Thread and Needle.
Additional Strong Quilting Thread.
Little Length of Elastic.
Headband.
Hot glue.
Scissors.
Plastic Gems.
Material Leaves (Or Make Felt Leaves).

I utilized sparkly white craft felt for her horn. Aside from the reality that it is, clearly, sparkly, the sparkle felt is quite a bit stiffer. Leave the bottom open.

Make it an excellent, huge knot, you do not desire it to pull through the felt when there is stress on it. Run the thread out near the pointer of the horn from within. Stuff the horn as tightly as you can, I used polyfill stuffing.

Start covering the thread down the horn in a spiral, securely enough to leave an excellent indent. This will offer your horn a great spiraled shape, and keep the thread from slipping and moving around on the horn. (This was the part I was most unsure about. I fretted that the material would bunch, or that the thread would not be strong enough to pull firmly, or that it would not remain in place. None of those fears came to light, it worked effectively.) Tie your thread off inside, near the bottom of the horn. Place your horn on another piece of matching felt, trace the bottom circle, and cut it out.

Beginning from the within, cover stitches around the edges of your felt, stitching the circle to the bottom of the horn, and connect it off. Attempt to conceal your knot inside, or a minimum of away from the edge.

I attached it to a good, broad, cloth-covered headband that we found at a dollar store. To do so, measure a piece of elastic around the center of the headband to get your length, then make it a bit smaller so that it will stretch comfortably into location. Stitch his explanation the flexible ends together to form a loop. Sew the elastic to the bottom of the horn. Take care to sew the elastic all the way to the edges of the horn, or the base will bring up at the front and back. Likewise ensure that the joint holding the elastic together gets sewn to the horn, in this manner it will end up on top of the headband, rather of as an uneasy swelling versus your kid's head.

Your unicorn horn is total! Oh, wait ... * ehem * Anyhow, when on the headband, I added a little hot glue under the edges of the horn to help keep it from wobbling any.

Hot glue the material leaves down either side of the headband, overlapping a little and rotating instructions. Cut a variety of flowers out of the coloured felt. (Tip: Your husband might get a little irritable if you attempt to do this in bed, stay with reading a book.) I truthfully believe layering has the most significant influence on how nice they come out looking. I utilized hot glue to repair the layers together. I have actually no idea how well hot glue works on wool felt, however it works amazingly on eco felt. I think the heat really fuses the layers together to an extent. For the large yellow flower, I merely cut a lot of strips of felt, folded them in half, then tacked them all together by their ends with a little thread.

Hot glue the flowers all over the headband, then hot glue the plastic gems to the centers. Make sure to overlap the base of the horn a bit and conceal the elastic band. You are the happy new owner of a unicorn horn flower crown!

I had a really hard time keeping her still long enough to take any images ...

Her rainbow unicorn tail is go right here now complete, too, and I have a full blown complete galloping around the house all day. According to Kaia, nevertheless, she already has 2 ears and didn't desire any more.

Because you understand that is what is going to take place when you put a unicorn horn on a 4 year old. When I made the horn, I was believing I would experiment a bit, start figuring things out. Make sure that the seam holding the flexible together gets sewn to the horn, this way it will end up on top of the headband, instead of as an uneasy lump versus your child's head.

Make sure to overlap the base of the horn a bit and cover up the flexible band. You are the proud brand-new owner of a unicorn horn flower crown!